Woodland Range
Woodland Seat
The legs of this seat extend 750mm into the ground. The top face and edges of each seat board are planed, the remaining parts are rough sawn.
- Boards 47 x 145mm approx. finished
- Uprights and bearers 75 x 150mm approx. finished.
- Length 2000mm in European oak or treated softwood, weight approx. 90kg. Length 1800mm in iroko, weight approx. 86kg.
- European oak or treated softwood finished in a dark oak coloured spirit based wood stain, click here.
- Iroko supplied planed and sanded,click here .
- Supplied with frames assembled, with seperate boards to bolt on
1800 Woodland Seat in iroko
2000 Woodland Seat in European oak
Hawthorn Seat
The legs of this seat extend 750mm into the ground. The top face and edges of each seat board are planed, the remaining parts are rough sawn. When specified in iroko all surfaces are planed and sanded
- Base boards 47 x 145mm approx. finished.
- Back boards 47 x 120mm approx. finished.
- Uprights and bearers 75 x 150mm approx. finished.
- Length 2000mm in European oak or treated softwood, weight approx. 96kg. Length 1800mm in iroko, weight approx.92kg.
- European oak or treated softwood finished in a dark oak coloured spirit based wood stain, click here.
- Iroko supplied planed and sanded, click here
- Supplied with frames assembled, with seperate boards to bolt on
2000 Hawthorn Seat in European oak
Woodland Bench
This bench is designed for ground fixing like the Woodland seat, with the legs extending
750mm into the ground, and also has seat boards planed on the top face and edges
- Boards 47 x 145mm approx. finished.
- Uprights and bearers 75 x 150mm approx. finished.
- Length 2000mm in European oak or treated softwood, weight approx. 66kg. Length 1800mm in iroko, weight approx. 64kg.
- European oak or treated softwood finished in a dark oak coloured spirit based wood stain, click here.
- Iroko supplied planed and sanded, click here
- Supplied with frames assembled, with seperate boards to bolt on.
2000
Woodland Bench
in European oak
Chestnut Bench
An inexpensive compromise between a bench and a picnic unit, this extra wide bench
is designed for small groups to use.
It is suitable for having a picnic on, as there is plenty of room to spread out.
The legs extend 400mm into the ground, and the seat boards are planed on the top face and edges.
- Boards 47 x 145mm approx. finished
- Uprights and bearers 75 x 150mm approx. finished
- Length 2000mm in European oak or treated softwood, weight approx. 132kg. Length 1800mm in iroko, weight approx. 128kg
- European oak or treated softwood finished in a dark oak coloured spirit based wood stain, click here.
- Iroko supplied planed and sanded, click here
- Supplied with frames assembled, with seperate boards to bolt on
2000
Chestnut Bench in European oak
Woodland Picnic Unit
This substantial unit uses galvanised steel reinforcing brackets to enhance its strength and rigidity. K9 galvanised ground fixing brackets are available to enable this freestanding item to be concreted in.
The top face and edges of each seat and table board are planed, the remaining parts being rough sawn.
When specified in iroko, all the surfaces are planed and sanded. A disabled access (DA) version is available with the table boards extended on one end by 200mm to facilitate access by wheelchair users, for a small additional cost.
- Table boards 47 x 145mm approx. finished (45 x 145mm in iroko)
- Seat boards 47 x 120mm approx. finished (45 x 95mm in iroko)
- Frames 75 x 125 mm and 75 x 100mm approx. finished (70 x 125mm & 70 x 100mm in iroko)
- Length 1800mm, weight approx. 150kg.
- European oak or treated softwood finished in a dark oak coloured spirit based wood stain, click here.
- Iroko supplied planed and sanded, click here.
- Supplied with frames assembled, with seperate boards to bolt on
Woodland
Picnic Unit
Woodlandand Ranger Bins
These rustic products have a substantial but unobtrusive galvanised steel frame which extends 300mm into the ground, onto which the slats are fixed.
They are
resistant to damage caused by fire, though the wooden slats on the lid can be
damaged in some circumstances. The 110 litre Woodland bin can also be supplied
without a lid.
The open top version has a facility to secure the liner with a padlock, which we can supply.
The lidded versions now have an opening handle, which also acts as a bump stop to protect the slats when the door is let down. The slats are only available in oak.
- Side slats Woodland 25 x 95mm approx finished, Ranger 25 x 80mm approx. finished
- Lid slats 25 x 85mm approx. finished
- Corner posts 57 x 57mm approx. finished
- Supplied with extended legs (for concreting in), as standard, ground anchoring versions available, click here
- Galvanised 22 swg sheet steel liner with 6mm wired edge, drain holes and pull-out handle
- Approx. capacities Woodland 110 litres, Ranger 55 litres
- Finished in a dark oak coloured spirit based wood stain, click here
- Weights approx. Woodland 75kg. Ranger 60kg.
- Supplied fully assambled
Woodland
and Ranger Bins with Lids
Woodland
Bin
Forester Bin
Primarily designed to accommodate floral tributes in cemeteries and crematoria,
this bin has a capacity of 220 litres. The slats are only available in oak.
- Slats 25 x 95mm approx. finished
- Corner posts 57 x 57mm approx. finished
- 590 x 1050 x 800mm high
- Galvanised 22 swg sheet steel liner, with 6mm wired edge, drain holes and handles
- Approx. capacity 220 litres
- Finished in a dark oak coloured spirit based wood stain, click here
- Supplied with extended legs (for concreting in), as standard
- Weight approx. 80kg.
- Suppled fully assembled
Forester
Bin
