Commemorative
Inscription Service

Traditional
All Timber Seats
Cast Iron Seats
Stainless Steel
Products
All Steel Seats
Universal Bench System
Steel Framed Seats
Litter Bins
 Lidded Bins
  Open Top Bins
 Extra Large Bins
 Installation Recommendations
Picnic Furniture
Bollards
Polyboard Range
Woodland Range
Junior Range
Ground Anchors
Materials & Finishes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Litter Bins

Extra Large Bins


Primarily designed to accommodate floral tributes in cemeteries and crematoria, these open top bins have a capacity of 220 litres. They are also useful in high throughput locations, where a large capacity is required. Timber slatted versions with steel  

corner posts can be manufactured to match the Milford bin.They can all be supplied with either one 220 litre liner, or two 110 litre liners. Because of the size of the 220 litre liner, two operatives are normally required to empty it.




Forester Bin

These rustic products are made from sawn green European oak (click here), which is hard and durable and is partially air or kiln dried to reduce the movement this material is prone to. They are resistant to damage caused by fire. The slats are only available in oak.
. Slats 25 x 95mm approx. finished
 
 

Forester Bin
. Corner posts 57 x 57mm approx. finished.
. Supplied with extended legs (for concreting in), as standard.
. Galvanised 22 swg sheet steel liner with 6mm wired edge, drain holes and lift-out handles.
. Approx. capacity 220 litres.
 . Finished in a dark oak coloured (click here)
. Weights approx. 90kg.
. Supplied fully assembled
. For installation recommendations click here.



Exeter Bin


Exeter Bin (14C40)

These bins are particularly resistant to damage caused by fire.
. Street-Tough finish in dark green 14C40 as standard. Acrylic Coating available. Eleven other standard colour options at no extra cost (click here).
 
Also available in any other B.S. or RAL colour for a surcharge
. Supplied with extended legs (for concreting in), as standard. Also available with pedestal base legs (for bolting down)
. Pedestal base option can be bolted down with K1 rawl bolts, or K4 extended rawl bolts
. Legs 40 x 40 x 2.5mm hollow
. Slats 40 x 40 x 3mm angle
. Approx. capacity 220 litres
. Galvanised 22 swg sheet steel liner with 6mm wired edge, drain holes and lift-out handles
. Weight approx. 81kg.
. Supplied fully assembled
. For installation recommendations click here.


Back to menu


Southampton Bin


Southampton Bin

These bins have wooden corner posts and additional slats to give an all-wooden appearance, whilst retaining the inherent benefits of a steel framed construction.
. Corner posts 45mm square, slats 19 x 57mm finished
. Posts and slats available in iroko or seasoned oak
 
. Click here for timber specifications and finishes
. Galvanised 22 swg sheet steel liner with 6mm wired edge, drain holes and lift-out handles
. Approx capacity 220 litres
. Supplied with extended legs (for concreting in), as standard. Also available with pedestal base legs (for bolting down)
. Pedestal base option can be bolted down with K1 rawl bolts, or K4 extended rawl bolts
. Frames in either Acrylic Coating or Street-Tough finish in brown 08B29 as standard (click here).
. Weight approx 55kg.
. Supplied fully assembled
. For installation recommendations click here.


Back to menu


Portsmouth Bin

    
Portsmouth Bin

The polyboards on these bins are made from ecologically sound recycled plastic described here, which is durable, water resistant, rot free, and requires no maintenance. In certain circumstances, particularly if vandals use an accelerant such as petrol, this material may catch fire and burn.
. Legs 40 x 40 x 2.5mm hollow.
. Slats 25 x 75mm in brown, or 30 x 100mm in black as standard. 30 x 100mm red, green, blue and yellow slats available at additional cost.
. Galvanised 22 swg sheet steel liner with 6mm wired edge, drain holes and lift-out handles.

 . Approx. capacity 220 litres
. Supplied with extended legs (for concreting in), as standard. Also available with pedestal base legs (for bolting down).
. Pedestal base option can be bolted down with K1 rawl bolts, or K4 extended rawl bolts.
. Frames finished in either Acrylic Coating or Street-Tough finish in brown 08B29, or black as standard (click here).
. Weight approx. 80kg.
. Supplied fully assembled
. For installation recommendations click here.

 

Back to menu