| |
| Litter
Bins
Lidded Bins
|
Each of our lidded bins has a fixed lid, access to the liner being gained
via a door which hinges down. An advantage of this design feature is that the
liner is less effort to empty; pulling it out of the front is easier than lifting
it out of the top. Bottom hinged doors are also less prone to hinge damage than
side hinged doors.
| 
| Shrouded
tamper resistant operating spindle | | Substantial
slamlatch | | Opening
arrangement | | | The
door pivots on a 12mm diameter solid bar, which is very robust, and far stronger
than a conventional hinge. The door is retained by a tamper resistant slam latch,
with a shrouded triangular operating spindle, which needs a special key to open
it. | | This
latch is very substantial, has brass internals for rust resistance and has been
specially designed and manufactured for our company by the U.K.'s leading industrial
locksmith. The key only needs to be used once, for opening the door. After replacing
the emptied liner the door is simply slammed shut. |
Cardiff
and Brecon Bins with Lids
| These
immensely popular designs outsell any others we manufacture by a considerable
margin.
They will survive in environments where other designs will not,
perhaps because their very appearance seems to discourage attack by vandals. When
our competitors' bins have fallen apart, try one of these!
They are
particularly resistant to damage caused by fire, which seems to be the final fate
of most bins. Plates can be attached to the sides of the bin, as shown, if required,
for logos or other information.
The door now has a handle, which also
acts as a bump stop to protect the slats when it is opened.
|
Cardiff
Bin (14C40) with lid, single post
mounting for ground anchoring |
.
Street-Tough finish in dark green 14C40 as standard. Acrylic Coating available.
Eleven other standard colour options at no extra cost (click
here). Also available in any other B.S. or RAL colour for a surcharge.
. Supplied with extended legs (for concreting in), as standard. Also available
with pedestal base legs (for bolting down).
. Pedestal base option can be
bolted down with K1 rawl bolts, or K4 extended rawl bolts.
. Single post mounting
version available, extended (for concreting in) as standard, or flanged, for ground
anchoring (click
here).
. Legs 40 x 40 x 2.5mm hollow, single post mounting leg
140 x 5mm circular hollow.
. Slats 40 x 40 x 3mm angle.
. Approx. capacities.
Cardiff 110 litres. Brecon 55 litres.
. Galvanised 22 swg sheet steel liner
with 6mm wired edge, drain holes and pull-out handle.
. Weights approx. Cardiff
65kg. Brecon 46kg.
. Supplied fully assembled
. For installation recommendations click
here. | 
Cardiff
Bin (14C40) and
Brecon (20C40) Bins with lids |
 Brecon
Bin with lid
|  |
Back to menu
Oxford
Bin with Lid
|
Immensely strong and attractive, this bin is available with either a galvanised
single post mounting, as shown above, or with all four corner posts extending
into the ground. The stainless steel version has a brushed satin finish.
. Street-Tough finish in dark green 14C40 as standard. Acrylic Coating available.
Eleven other standard colour options at no extra cost (click
here). Also available in any other B.S. or RAL colour for a surcharge.
. Supplied with single post mounting (for concreting in) as standard. Also available
with legs on all four corner posts, pedestal base, (for bolting down), or extended
(for concreting in). Ground anchoring version also available, click
here.
. Pedestal base option can be bolted down with K1 rawl bolts,
or K4 extended rawl bolts.
| | 
 | | |
Oxford
Bin (RAL 5017) with lid, single post mounting | | Oxford
Bin with lid in stainless steel | |
| |
. Legs 40 x 40 x 2.5 hollow, single post mounting leg 140 x 5mm circular
hollow.
. Slats 50 x 30 x 2mm hollow, and 50 x 25 x 2mm hollow.
. Approx.
capacity 110 litres.
. Galvanised 22 swg sheet liner with 6mm wired edge,
drain hole and pull-out handle.
. Weight approx. 75kg
. Supplied fully assembled
. For installation
recommendations click here. |
Back to menu
Milford
and Newton Bins with Lids
| 
Milford
and Newton Bins with lids
| | .
Legs 40 x 40 x 2.5mm hollow.
. Wooden slats 19 x 57mm finished.
. Slats
available in iroko or seasoned oak.
. Click
here for timber specifications and finishes.
. Galvanised 22 swg
sheet steel liner with 6mm wired edge, drain holes and pull-out handle.
.
Approximate capacities Milford 110 litres. Newtown 55 litres.
. Supplied
with extended legs (for concreting in), as standard. Also available with pedestal
base legs (for bolting down).
. Pedestal base option can be bolted down with
K1 rawl bolts, or K4 extended rawl bolts.
. Single post mounting version available,
extended (for concreting in) as standard, or flanged, for ground anchoring
(click
here)
. Frames in either Acrylic Coating or Street-Tough finish
in black as standard (click
here).
. Weights approx. Milford 46kg. Newtown 36kg.
. Supplied fully assembled
. For
installation recommendations click
here. |
These bins have wooden slats riveted to welded steel frames, and are suitable
for general park and street use. They are reasonably fire resistant, but the wooden
slats on the lid can be damaged in some circumstances. | |
Back to menu
Woodland
and Ranger Bins with Lids
| 
Woodland
and Ranger Bins with lids | |
They now have
an opening handle, which also acts as a bump stop to protect the slats when the
door is let down. The slats are only available in oak.
. Side slats Woodland
25 x 95mm approx. finished. Ranger 25 x 80mm approx. finished.
. Lid slats
25 x 85mm approx. finished.
. Corner posts 57 x 57mm approx. finished.
. Supplied with extended legs (for concreting in), as standard, ground anchoring
version available (click
here).
. Galvanised 22 swg sheet
steel liner with 6mm wired edge, drain holes and pull-out handle.
. Approx.
capacities Woodland 110 litres, Ranger 55 litres
. Finished in a dark oak
coloured spirit based woodstain, click
here.
. Weights approx. Woodland 75kg. Ranger 60 kg.
. Supplied fully assembled
. For
installation recommendations click
here.
|
These rustic products are made from sawn green European oak and have a substantial
but unobtrusive galvanised steel frame which extends 300mm into the ground, onto
which the slats are fixed. The European oak (click
here), is hard and durable and is partially air or kiln dried to reduce
the movement this material is prone to. They are resistant to damage caused by
fire, though the wooden slats on the lid can be damaged in some circumstances.
| |
Back to menu
Montgomery
Bin with Lid
|
These bins are designed to complement our Traditional range of seats, and our
cast iron ended products. They have wooden corner posts and additional slats to
give an all-wooden appearance, whilst retaining the inherent benefits of a steel
framed construction. They are reasonably fire resistant, but the wooden slats
on the lid can be damaged in some circumstances.
|
|
Montgomery
Bin with lid
| .
Corner posts 45mm square, slats 19 x 57mm finished.
. Posts and slats available
in iroko or seasoned oak.
. Click
here for timber specifications and finishes
. Galvanised 22 swg
sheet steel liner with 6mm wired edge, drain holes and pull-out handle
.
Approx capacity 55 litres.
. Supplied with extended legs (for concreting in),
as standard. Also available with pedestal base legs (for bolting down).
.
Pedestal base option can be bolted down with K1 rawl bolts, or K4 extended rawl
bolts.
. Frames in either Acrylic Coating or Street-Tough finish in brown
08B29 as standard (click
here)
. Weight approx 37kg.
. Supplied fully assembled
. For installation recommendations
click here. | |
Back to menu
|
Flint Bin with Lid | 
Flint
with lid | | Flint
Bin with lid |
|
This bin has polyboard slats riveted to welded steel frames. The polyboards are made
from an ecologically sound recycled material described
here, which is durable, water resistant, rot free, and requires no
maintenance. In certain circumstances, particularly if vandals use an accelerant
such as petrol, this material may catch fire and burn, though this bin has
galvanised steel shrouds around the top part of the bin, underneath the polyboards,
to reduce the risk of them catching fire. The recent availability of recycled
plastic in a range of bright colours makes these bins particularly suitable for
play areas.
. Legs 40 x 40 x 2.5mm hollow.
. Slats 25 x 75mm in brown
as standard, 30 x 100mm in black at no additional cost, or 30 x 100mm red, green
,blue and yellow slats available at additional cost.
| |
. Galvanised 22 swg sheet steel liner with 6mm wired edge, drain holes and pull-out
handle.
. Approx. capacity Flint 110 litre, .
. Supplied
with extended legs (for concreting in), as standard. Also available with pedestal
base legs (for bolting down).
. Pedestal base option can be bolted down with
K1 rawl bolts, or K4 extended rawl bolts.
. Single post mounting version available,
extended (for concreting in) as standard, or flanged, for ground anchoring (click
here).
. Frames finished in either Acrylic Coating or Street-Tough
finish in brown 08B29, or black as standard (click
here).
. Weights approx. Flint 73kg.
. Supplied fully assembled
. For installation
recommendations click here. |
Back to menu
Back to menu
|
